Ohaus GT4100DG Electronic Balances - Manual (Page 31)

31
Date (Cont.) Date (Cont.) Date (Cont.) Date (Cont.) Date (Cont.)
8. to change flashing digit to current month for US or day for
European standard.
9. flashes two centered digits.
10. to change digits.
11. last two digits are year.
10. to change year.
11. .
Lockswitch Lockswitch Lockswitch Lockswitch Lockswitch
Lockswitch enables you to lock out one or more menu selections. Each menu can be
individually locked on or off after all functions have been set. The Calibration
Calibration Calibration Calibration Calibration, User, User, User, User, User,
Setup Setup Setup Setup Setup and Print Print Print Print Print menus can be individually locked on or off by selecting the appropriate
menu and then locked by the switch located under the front of the control panel. See
Menu Lockout Section. Cal Test under Calibration remains functional with the
Lockswitch On or Off. Before performing the lockout procedure, decide which
functions of the balance are to be locked on or off.
1. Access the submenu.
2. to access either Calibration, User, Setup or print submenus.
3. to select desired submenu.
4. to access a selected submenu.
5. to select or .
YES = locked, NO = not locked. YES = locked, NO = not locked. YES = locked, NO = not locked. YES = locked, NO = not locked. YES = locked, NO = not locked.
6. to accept.
7. to change to other submenus.
8. To change all submenus, repeat steps 2 through 6.