Ohaus GT4100DG Electronic Balances - Manual (Page 22)

22
User Menu Protection User Menu Protection User Menu Protection User Menu Protection User Menu Protection
The User menu may be locked out to prevent unauthorized personnel from changing
the settings. If -SAFE- is displayed, the User menu has been locked out. Settings may
be viewed but not changed. To lock out the User menu, refer to the section titled Menu
Lock-Out Protection.
Reset Reset Reset Reset Reset
This submenu enables you to reset all User menu selections to the factory default
settings: Averaging Level AL 1 AL 1 AL 1 AL 1 AL 1,Stability Range .5d, .5d, .5d, .5d, .5d, Auto-Zero Tracking .5d .5d .5d .5d .5d and
Beep OFF. OFF. OFF. OFF. OFF. Reset does not appear if the menu has been locked out.
1 .
2. .
3. .
4. .
5. to select or .
6. . If is selected, the balance signals a
double short beep .
Averaging Level Averaging Level Averaging Level Averaging Level Averaging Level
Averaging level compensates for vibration or excessive air currents. Factory default
setting is shown in bold type.
AL 0 reduced stability, fastest stabilization time
AL AL AL AL AL 1 normal stability, normal stabilization time 1 normal stability, normal stabilization time 1 normal stability, normal stabilization time 1 normal stability, normal stabilization time 1 normal stability, normal stabilization time
AL 2 more stability, slow stabilization time
AL 3 maximum stability, slowest stabilization time
NOTE NOTE NOTE NOTE NOTE: Averaging level does not affect balance accuracy, but it does affect stabilization
time.