Ohaus GT4100DG Electronic Balances - Manual (Page 14)

14
Weighing Weighing Weighing Weighing Weighing
1. to rezero the display.
2. Place the object(s) or material to be weighed on the platform.
3. Wait for the stability indicator to appear before reading the weight.
Stabilization Stabilization Stabilization Stabilization Stabilization
Before initally using the balance, allow time for it to adjust to its new environment. The
balance only requires to be plugged in to warm up. Recommended warm up period
is twenty (20) minutes. The balance is powered whenever it is plugged into a power
source.
Moveable FineRange Moveable FineRange Moveable FineRange Moveable FineRange Moveable FineRange TM TM TM TM TM (Model GT4100DG) (Model GT4100DG) (Model GT4100DG) (Model GT4100DG) (Model GT4100DG)
Model GT4100DG contains a Moveable FineRange TM feature.
When the weight of the object on the platform exceeds the capacity limit of the
Moveable FineRange
TM , the balance will automatically change to the coarse range.
To return to the fine range:
1. The load is reduced to below the capacity limit of the fine range.
2. .
CENTER OF ZERO
STABILITY INDICATOR
Re-Zero Re-Zero Re-Zero Re-Zero Re-Zero
When weighing material or objects that must be held in a container, zeroing stores the
container weight in the balance’s memory, separate from the weight of the material in
the container.
1. Place an empty container on the platform. Its weight is displayed.
2. , the display blanks until stable weight readings are received, then
indicates zero. The container’s weight is stored in memory.
3. Add material to the container. As material is added, its net weight is displayed.
4. Removing the container and material from the platform will cause the balance
to display the container’s weight as a negative number.
5. resets the balance to zero.