Ohaus GT4100DG Electronic Balances - Manual (Page 19)

19
Span Calibration Span Calibration Span Calibration Span Calibration Span Calibration
1. .
2. .
3. , no mass on platform.
4. , value of mass which
must be placed on the platform.
5. Place mass on platform.
6. . Do not disturb Do not disturb Do not disturb Do not disturb Do not disturb
the balance when -C- is displayed. the balance when -C- is displayed. the balance when -C- is displayed. the balance when -C- is displayed. the balance when -C- is displayed.
7. Remove mass from platform. Span calibration is complete. The balance is now
in a weighing mode.
Linearity Calibration Linearity Calibration Linearity Calibration Linearity Calibration Linearity Calibration
1. Repeat steps 1 and 2 of Span Calibration above.
2. .
3. , no mass on platform.
4. , value of mass which
must be placed on the platform.
5. Place mass on platform.
6. , value of next mass
which must be placed on the platform.
7. Place mass on platform.
8. Do not disturb the Do not disturb the Do not disturb the Do not disturb the Do not disturb the
balance when -C- is displayed. balance when -C- is displayed. balance when -C- is displayed. balance when -C- is displayed. balance when -C- is displayed.
9. Remove mass from platform. Linearity calibration is complete. The balance is
now in a weighing mode.