Ohaus GT4100DG Electronic Balances - Manual (Page 10)

10
Press and Release Press and Release Press and Release Press and Release Press and Release:
Turns on the balance if it is off, zeros the balance. Clears the dockage
memory. In the menu system, this button is used to accept a choice
or enter a submenu.
Extended Press Extended Press Extended Press Extended Press Extended Press:
Used to access the calibration, user, setup and print menus.
Press and Release Press and Release Press and Release Press and Release Press and Release:
Cycles balance through (g, oz, lb) weighing units that are enabled
and dockage (not Test Weight). If no valid dockage reference exists,
dockage will be skipped. In the menu system, this button is used to
change the indicated selection or move forward to the next menu
choice.
Extended Press Extended Press Extended Press Extended Press Extended Press:
Turns the balance off.
Press and Release Press and Release Press and Release Press and Release Press and Release:
Pressing this button will momentarily display the current memory
weight.
Extended Press Extended Press Extended Press Extended Press Extended Press:
Takes the current net weight on the platform and sets this value as the
100 percent memory value. Balance then indicates load as a
percentage of this value.
Press and Release Press and Release Press and Release Press and Release Press and Release:
Puts the balance in test weight mode. (Note that this requires a
calibrated volume container. In the menu system, moves the menu
in reverse order.
Extended Press Extended Press Extended Press Extended Press Extended Press:
Prints value on the display according to Print Menu settings.
OPERATION OPERATION OPERATION OPERATION OPERATION
Switch Functions Switch Functions Switch Functions Switch Functions Switch Functions