EVS IPDirector Version 5.9 - January 2011 Part 2 User’s Manual - Manual (Page 88)

IPDirector Version 5.9 – User Manual – Part 2: Logging
EVS Broadcast Equipment – January 2011
Issue 5.9.B
77
2.6 ASSIGNING A KEYWORD TO A MEDIA
Keywords can be assigned to media (log, clip or playlist) when it is created or
edited.
2.6.1 H
OW TO
(U
N
)A
SSIGN A
K
EYWORD TO A
M
EDIA
You can choose to add keywords from a keyword grid or from a dictionary. When
the media is being created or edited and the corresponding window (create or edit)
is opened, proceed as follows:
1. Open the relevant keyword grid or the relevant dictionary.
The Apply button of the keyword grid should be active (highlighted).
Otherwise, click the New/Edit window again.
2. Click the keyword.
It is added to the media window and it is highlighted in the keyword grid or
dictionary.
3. To remove a keyword, click it again in the keyword grid or dictionary.
It is removed from the media window.
Note
The Edit mode must be inactive.
2.6.2 H
OW TO
(U
N
)A
SSIGN A
K
EYWORD
U
SING THE
K
EYWORD
N
UMBER
When you work with the Keyword Grid tool, you can assign keywords using the
keyword numbers associated with each keyword of the grid. They allow a fast
selection of the keyword.
To assign a keyword to a log or clip using the keyword number, proceed as
follows:
1. Open the relevant keyword grid and select View > Keyword Numbers to
view the numbers associated to each keyword.
2. Open the Create/Edit Log, Create/Edit Playlist or New/Edit Clip window of
the media in IPDirector.
The Apply button should become active (highlighted) in the keyword grid.