EVS IPDirector Version 5.9 - January 2011 Part 2 User’s Manual - Manual (Page 18)

IPDirector Version 5.9 – User Manual – Part 2: Logging
EVS Broadcast Equipment – January 2011
Issue 5.9.B
7
R
ECREATE ALL
T
HUMBNAILS
B
UTTON
A thumbnail is automatically generated on the preview recorder. If needed, all
thumbnails can be re-generated for a log sheet by pressing the Recreate All
Thumbnails button.
1.2.4 L
OGGING
B
UTTONS
Logging buttons are used to create log entries. Refer to section 1.4 ‘Creating Log
Sheet Entries’ on page 22.
S
ETTING THE
T
IMECODE
D
ISPLAY
The timecode that is shown in the IP Logger window can be either:
• USER timecode (displayed in yellow)
• LTC (Longitudinal Time Code) (displayed in white)
To switch between USER and LTC timecode: right-click the USER or LTC label
(see 2. in the procedure below) and select the desired option.
The time code can be displayed in two different ways.
To change the time code display setting, proceed as follows:
1. Right-click the time code field.
The following menu is displayed:
2. Select one of the display options:
• Timecode