EVS Xfile Version 2.12 - July 2009 User Manual - Manual (Page 84)

XFile Version 2.12 – User Manual
EVS Broadcast Equipment – July 2009
Issue 2.12.D
83
• If the selected location is already filled, the clip destination lights
red. In this case the publication of this clip will be aborted.
Select a publishing method from the Destination Mode drop-down list
and press OK. For more details on the various options, see section
‘Restore Destination Mode’, on page 80).
7. You may switch to the Fast Publish mode by pressing the
(Fast
Publish) button.
8. Select other clips from the XFile list and repeat the operation.
Clips are sent to XNet. Depending on the number of clips, this operation can
take some time.
In the XFile list and XNet list, clips are highlighted in
• light yellow when the publish is scheduled
• light orange when the publish is done
The counter and the Publish column of the XFile list are updated as clips are
published.
F
AST
P
UBLISH
To publish clips with Fast Publish, you first need to initiate the Online
Publish transfer. To do so, proceed as follows:
1. Repeat steps 1 to 6 from the Online Publish procedure detailed above.
2. Press
(Fast Publish) to switch to switch to the Fast Publish mode
for the transfer of the selected clip.
3. A message warns you that XFile will be disconnected from the XNet.
4. Press Yes.
5. Select other clips from the XFile list and repeat the operation.
The XNet list, the counter and the Publish column of the XFile list are
updated as soon as XFile is reconnected to the XNet.