EVS Xfile Version 2.12 - July 2009 User Manual - Manual (Page 125)

Issue 2.12.D XFile Version 2.12 – User Manual
EVS Broadcast Equipment – July 2009
124
Q
UICK
S
TART
M
ODE
When a job is launched in the QuickStart mode, the time grid will display it
as an endless job in progress from the nowline onwards. The other possible
status in QuickStart mode is ‘failed jobs’.
4.3.2 T
IME
D
ISPLAY IN THE
T
IME
G
RID
T
IME
D
ISPLAY
M
ODES
From version 2.00, it is possible to specify which time mode has to be used
in the XStream time grid. This time display is set up via the menu Record
Grid > Display Mode (See also the setting ‘Display Mode’, on page 135).
The time information can be displayed in one of the following modes in the
XStream time grid:
Display Mode Description
T/C Primary Timecode (LTC or user-defined timecode type) that is
displayed at the bottom the VGA and is used to work
with the video material stored on a given recorder. The
Primary TC is defined for each recorder on page 1 of the
setup configuration in Multicam.
LTC Longitidinal time code (LTC) is a timing signal that is
part of an audio tape recording. It is recorded on a track
that runs lengthwise along the tape, which is why it is
called longitudinal. It can only be read if the tape is
playing.
User T/C User time code of the first camera available on the first
XT[2] server displayed in the grid. This time code is
defined by the user on the XT[2] server.
PC Time Date/Time of the XStream workstation.
This mode is the default value with XFile version 1.14.