EVS Xfile Version 2.12 - July 2009 User Manual - Manual (Page 29)

Issue 2.12.D XFile Version 2.12 – User Manual
EVS Broadcast Equipment – July 2009
28
Note
The Default XFile setting allows the user to initiate the backup of a
clip from the XT[2] server via the >ARCHIVE command (see
Multicam documentation for details).
The Archive Flag also initiates the backup of a clip as
requested by the >ARCHIVE command even if the Default XFile is
not set, but the Archive status on the XT[2] server is not updated.
Time Range
The autobackup session can be defined for a specific duration.
Select the check-box to activate the time range filter and press one of the
Time Range Selection button to access this window:
The Time Range filter requires a start date and time, as well as an end date
and time, to be valid:
1. In the calendar, select the month with the left and right arrows, then
the day of the month.
2. In the Time field, select the hour using the up and down arrows to
change the value displayed or directly type the value when the field
lights green.
3. Press ENTER to confirm your selection.
4. Enter the second selection window to enter the values for the end limit.
The Autobackup criterion is now active and only the clips created into the
time range will be backed up.