EVS Xfile Version 2.12 - July 2009 User Manual - Manual (Page 80)

XFile Version 2.12 – User Manual
EVS Broadcast Equipment – July 2009
Issue 2.12.D
79
3.6.2 H
OW TO
P
ERFORM A
M
ULTI
-S
ELECTION FOR
R
ESTORE
To select multiple clips from an XFile to restore them to an XT[2] server,
proceed as follows:
1. In the XFile list on the main XFile window, do one of the following:
• To select a list of contiguous clips, press SHIFT and select the first
and last clips of the list.
• To select non-contiguous clips, press CTRL and select the clips.
• To select all the clips displayed in the XFile list, press CTRL + A.
The Select All command is also available via the contextual menu on
the list of clips.
2. Select the server from the XNet list.
3. Change the display of the list to find one location and select the first
location to restore the clips.
4.
Press or to open the following window:
• If the selected location is free, the clip destination lights green.
• If the selected location is already filled, the clip destination lights
red. In this case, the clip restore will be aborted. A second operation
is necessary to restore the clip to another location on the XNet.
5.
Select a restore method from the Destination Mode drop-down list.
For more details, refer to the section ‘Restore Destination Mode’, on
page 80.