EVS EPSIO Version 1.63 - May 2011 User's Manual - Manual (Page 22)

Issue 1.63.C Epsio Version 1.63 – User’s Manual
EVS Broadcast Equipment – May 2011
16
4. As you check the incoming and outgoing signals, you can perform the following
actions to help you identify the signals:
o
To check the incoming signals, you can click the Grab button to grab the
current image delivered to the incoming feeds.
o
To check the output signal from the OUT1 connector, you can either change
the signal sent to OUT1 by selecting In 1, In 2, or Bars, or add the PC time or
a logo display to the output signal.
o
To check the current output signal from the OUT 2 connector, you can click
the Freeze button to refresh the video display corresponding to output 2.
5. When you have checked the incoming and outgoing video signals, click the
Apply button.
6. Click Exit.