EVS EPSIO Version 1.63 - May 2011 User's Manual - Manual (Page 21)

Epsio Version 1.63 – User’s Manual
EVS Broadcast Equipment – May 2011
Issue 1.63.C
15
2.2.4 C
HECKING THE
V
IDEO
F
EEDS
Once you have switched on the Epsio workstation for an event, you should check
that you correctly get the feeds before you launch the Epsio software. The Epsio
Configurator helps you detect and check the feeds.
To check the video feeds, proceed as follows:
1. To open Epsio Configuration, double click on the desktop or select
Epsio Configurator via the Start menu in Program Files > EVS Broadcast
Equipment > Epsio > Epsio Configurator.
2. In the Setup group box, select the Video Format you are working with.
3. Click the button.
Epsio checks the format you have selected is compatible with the format used
by the EVS server.
If the right format is selected, Epsio automatically grabs and displays an
image of the video signals.