EVS EPSIO Version 1.63 - May 2011 User's Manual - Manual (Page 11)

Epsio Version 1.63 – User’s Manual
EVS Broadcast Equipment – May 2011
Issue 1.63.C
5
Note
When the offside line mode is active on the LSM Remote Panel, you
cannot use the mouse outside the operating monitor in Epsio.
To be able to move the mouse in the whole Epsio window, do one of the
following:
• In Epsio, press on the keyboard.
• Press RECORD on the LSM Remote Panel to go out of the offside line
mode.
1.3.2 O
PERATING
M
ONITOR
The operating monitor shows the video signal coming from the EVS server and
received on the Epsio connector IN1. It allows the users to visualize the
configuration action they perform, or the animations they create.
The image on the monitor is surrounded by a colored frame, which varies
depending on the tab open in the tabbed area on the right of the Epsio main
window:
• Blue frame when the Calibration tab is open
• Red frame when the Tools tab is open
• Green frame when the Chroma tab is open
1.3.3 S
ERVER
I
NFORMATION
A
REA
The Server Information area is located at the left bottom of the Epsio main window
and provides the following information:
The following table describes the information available in the Server Information
area, from the top to the bottom line.
When both systems are correctly connected for both Epsio inputs, the icons in
front of the first four lines are green. Otherwise, they are red.