EVS Xfile Version 2.14 - January 2011 User Manual - Manual (Page 75)

Issue 2.14.B XFile Version 2.14 – User Manual
EVS Broadcast Equipment – January 2011
66
3.5 AUTOBACKUP MODE
3.5.1 P
URPOSE
Click to activate the Autobackup Mode. In this mode, the system
acts automatically and backs up all clips according to the criteria defined in the
Autobackup selection window. Besides, this mode is important to take account of
the different updates made during operations.
When the users select the Autobackup mode, the application performs the
Scanning Network process again to retrieve all clips to be backed up on the XNet
network.
Note
This mode MUST be enabled for the user's > ARCHIVE commands from
the Multicam systems to be taken into account.
Thanks to the selection list, the autobackup process is an automatic and self-
operating system. When a clip is created on one of the selected servers, a copy is
automatically transferred to XFile. The XFile operates with the lower priority on
the network, this means that the normal operations of other servers are not
affected by the XFile activity.
If the cameras/systems selection needs to be modified, the autobackup mode must
be disabled before entering the Session Configuration window.