EVS Xfile Version 2.14 - January 2011 User Manual - Manual (Page 42)

XFile Version 2.14 – User Manual
EVS Broadcast Equipment – January 2011
Issue 2.14.B
33
The following color code is used:
Background color Meaning
Bright red Unauthorized location
Bright green First location which will be used when publishing
Pale green Authorized location
To switch one color for another, proceed as follows:
Files Move
If the job succeeds, the files will be moved to the ‘Done_Successful’ subfolder.
If the job failed after 5 tries, the files will be moved to the ‘Done_Failed’
subfolder.
A
UTO
P
UBLISH
The AutoPublish function enables the automatic publication of files from a folder
to a defined location on the XNet. This is done through the SDTI network.
The AutoPublish Mode can be activated from the main XFile window by clicking
the AutoPublish button.
Enable AutoPublish at Start
If the Enable AutoPublish at Start box is selected, the AutoPublish Mode will be
active as soon as XFile is started.
Enabling Configuration
Up to 2 different configurations can be pre-defined. To do so, select a
configuration number in the Config field, fill in all the other fields and click OK.
To enable one of these configurations, select it the Config field, select the Enable
Config box and click OK. Some or all of the predefined configurations can be
enabled.
Scan Folder
This field defines the folder to scan for backup files to be published.