EVS Xfile Version 2.14 - January 2011 User Manual - Manual (Page 20)

XFile Version 2.14 – User Manual
EVS Broadcast Equipment – January 2011
Issue 2.14.B
11
If you assign more channels than supported in the defined configuration, the
system will automatically adapt the number of assigned channels when the
configuration is saved.
Available Channels
Read-only display of the available channels depending on the backup functions
selected in the dialog box.
OK
Clicking the OK button will confirm and save the defined configuration.
Cancel
Clicking the Cancel button will cancel the changes and brings the users back to
the XFile Config System window.
3.1.4 S
TORAGE
A
REA
D
ISK MODE
The Disk Mode defines the maximum number of disks, or paths, which can be used
to save the backup files. One to 4 disks can be selected.
Refer to section ‘Disk Writing Mode’ on page 28 for additional information.
P
ATH
A / B / C / D
This specifies the destinations to save the backup files. Depending on the Disk
mode selection, up to 4 paths are active for modifications.
Important
At startup, only the clips saved into the Path(s) are scanned. This
means only those clips, data included, will be accessible and display in
the XFile list.
3.1.5 S
YSTEM
A
REA
Serial Number
The serial number of the system is defined during the first installshield process
and cannot be modified afterwards. The S/N is also written on the back plate of
the mainframe.