EVS Xfile Version 2.14 - January 2011 User Manual - Manual (Page 188)

XFile Version 2.14 – User Manual
EVS Broadcast Equipment – January 2011
Issue 2.14.B
179
H
OW TO
C
REATE A
N
EW
G
HOST
I
MAGE OF YOUR
S
YSTEM
1. Reboot the system on Bootable DVD (or USB key) which is delivered with
the original system. On XFILE system, modify Boot priority in the BIOS
settings in order to boot on the USB key.
2. For USB key only, select ‘EVS Ghost Backup or Restore’ in the menu.
3. In the ghost startup window, press ENTER.
4. In the next window, select Local / Partition / To Image then ENTER.
5. In the next window, select the Source drive, drive #1 then ENTER.
6. In the next window, select the Source partition #1 then ENTER. Press the
TAB key to select the OK button, then ENTER.
7. In the next window, press the TAB key to select the Look in area and open
it by pressing the down arrow key. Select the destination drive: D fat drive
(RESTORE) then ENTER.
8. Press the TAB key to select the File name area then type the file name:
XFI111XX (where 111XX is the current version number). It is also
recommended to provide a description of the GHOST you are creating.
9. Press the TAB key to select Save then ENTER.
10. Select ‘Compress high’, then ENTER.
11. At the message ‘Proceed with partition image creation’ select yes then
ENTER.
12. When the process is complete press ENTER. Select Quit then ENTER, then
Yes and ENTER.
13. Remove the USB key or DVD and reboot the system.