EVS Xfile Version 2.14 - January 2011 User Manual - Manual (Page 40)

XFile Version 2.14 – User Manual
EVS Broadcast Equipment – January 2011
Issue 2.14.B
31
3.3.4 T
AB
4 – S
CAN
F
OLDER
A
UTO
R
ESTORE
The Auto Restore function enables the automatic restore or copy of files from a
folder to a defined location on an EVS video server. This is done through the GBE
or the SDTI network.
The AutoRestore Mode can be activated from the main XFile window by clicking
the AutoRestore button.
Enable AutoRestore at Start
If the Enable AutoRestore at Start box is selected, the AutoRestore Mode will be
active as soon as XFile is started.
Enabling Configuration
Up to 5 different configurations can be pre-defined. To do so, select a
configuration number in the Config field, fill in all the other fields and click OK.
To enable one of these configurations, select it the Config field, select the Enable
Config box and click OK. Some or all of the predefined configurations can be
enabled.