American Magnetics 12100PS DC Power Supply (CE-Marked) - Manual (Page 13)

OPERATING MANUAL FEATURES AND SPECIFICATIONS
Release 2.0 (98/06) 1-5
1.3.4 Additional Characteristics
Switching Frequency 7.5V to 40V models: nominal 78kHz (156kHz output
ripple) ;
60V to 600V models: nominal 62.5kHz (125kHz output
ripple)
Output Hold-up Time Greater than 20 ms with interruption of AC line, for
nominal AC input and full load
Maximum Voltage Differential
from either output to safety ground
600Vdc
1.3.5 Remote Programming and Monitoring
Remote Start/Stop and Interlock TTL Compatible Input, selectable logic
Remote Analog Programming (Full Scale Input) Voltage and current programming:
0-5k, 0-10k resistances; 0-5V, 0-10V voltage sources
Maximum Remote Sense Line Drop Compensation 5V/line (Line drop is subtracted from total voltage
available at supply output.)
Remote Monitoring Output voltage and current: 0-5V, 0-10V
0 to full scale output 1% accuracy
Optional Isolated Program and Readback (V&I) 0-5V (ISOL Interface)
Optional Digital Control RS-232, GPIB Interfaces
1.3.6 Environmental Specification
Operating Temperature Range 0°C to 50°C
Storage Temperature Range -20°C to +70°C
Humidity Range 30% to 90% RH non-condensing
Operating Altitude Derate maximum operating temperature by 1°C per 1,000
feet (300 m) for operation between 5,000 feet
(1500 m) and 15,000 feet (4500 m)
Storage Altitude Up to 50,000 feet (15 000 m)
Installation Category Intended for use in installation category (overvoltage
category) II (IEC 1010-1 standard).
1.3.7 Mechanical Specification
Front Panel Control 10-turn voltage and current potentiometers
Front Panel Voltage Control Resolution 0.02% of maximum voltage
Meter Accuracy See Table 1.3-1 and Table 1.3-2
AC Input Connector Type 3-terminal 34A, 250V, right angle, PC mount, wire clamp
connector with strain relief cover
Output 7.5V to 40V models: nickel-plated copper bus bars with
optional bus bar shield; bus bar holes: 0.332" (8.17 mm)
diameter (D) (1), 0.197" (5.0 mm) D (2);
60V to 600V models: 4-terminal wire clamp connector.