American Magnetics 12100PS DC Power Supply (CE-Marked) - Manual (Page 10)

FEATURES AND SPECIFICATIONS OPERATING MANUAL
1-2 Release 2.0 (98/06)
1.3 Specifications
1.3.1 Electrical Specifications
These specifications are warranted over a temperature range of 0°C to 50°C. Ambient temperature is 25°C.
Nominal line voltages are 120Vac and 230Vac. Table 1.3-1 and Table 1.3-2 post maximum values for
model-dependent specifications. Specifications are subject to change without notice.
Table 1.3-1 Specifications for 7.5V to 60V Models
Models 7.5-140 12-100 20-60 40-30 60-20
Output Ratings: Output Voltage 1
Output Current
Output Power
0-7.5V
0-140A
1050W 0-12V
0-100A
1200W 0-20V
0-60A
1200W 0-40V
0-30A
1200W 0-60V
0-20A
1200W
Line Regulation: 2
Voltage (0.01% of Vmax + 2mV)
Current (0.01% of Imax + 2mA)
2.75mV
16mA 3.2mV
12mA 4mV
8mA 6mV
5mA 8mV
4mA
Load Regulation: 3
Voltage (0.02% of Vmax + 5mV)
Current (0.02% of Imax + 5mA) 6.5mV
33mA 7.4mV
25mA 9mV
17mA 13mV
11mA 17mV
9mA
Meter Accuracy:
Voltage (1% of Vmax + 1 count)
Current (1% of Imax + 1 count) 0.09V
1.5A 0.13V
1.1A 0.3V
0.7A 0.5V
0.4A 0.7V
0.3A
Output Noise (0-20MHz): Voltage (p-p) 75mV 75mV 75mV 150mV 150mV
Output Ripple (rms): Voltage
Current 4
10mV
500mA 10mV
500mA 10mV
500mA 10mV
200mA 10mV
100mA
Drift (30 minutes): 5
Voltage (0.05% of Vmax)
Current (0.6% of Vmax)
For Resistive Programming:
Voltage (0.6% of Vmax)
Current (0.6% of Imax)
3.75mV
840mA
45 mV
840mA
6mV
600mA
72mV
600mA
10mV
360mA
120mV
360mA
20mV
180mA
240mV
180mA
30mV
120mA
360mV
120mA
Drift (8 hours): 6
Voltage (0.05% of Vmax)
Current (0.05% of Imax)
For Resistive Programming:
Voltage (0.3% of Vmax)
Current (0.3% of Imax)
3.75mV
70mA
22mV
420mA
6mV
50mA
36mV
300mA
10mV
30mA
60mV
180mA
20mV
15mA
120mV
90mA
30mV
10mA
180mV
60mA
Temperature Coefficient: 7
Voltage (0.02% of Vmax/°C)
Current (0.03% of Imax/°C)
For Resistive Programming:
Voltage (0.06% of Vmax/°C)
Current (0.06% of Imax/°C)
1.5mV
42mA
4.5mV
84mA
2.4mV
30mA
7.2mV
60mA
4mV
18mA
12mV
36mA
8mV
9mA
24mV
18mA
12mV
6mA
36mV
12mA
OVP Adjustment Range:
(5% to 110% of Vmax) 0.375-8.25V 0.6-13.2V 1-22V 2-44V 3-66V
Efficiency: 8 0.78 0.81 0.81 0.83 0.86
1 Minimum output voltage is <0.15% of rated voltage at zero output setting.
2 For input voltage variation over the AC input voltage range, with constant rated load.
3 For 0-100% load variation, with constant nominal line voltage.
4 Current mode noise is measured from 10% to 100% of rated output voltage, full current.
5 Maximum drift over 30 minutes with constant line, load, and temperature, after power on.
6 Maximum drift over 8 hours with constant line, load, and temperature, after 30 minute warm-up.
7 Change in output per
G C change in ambient temperature, with constant line and load.
8 Typical efficiency at 100Vac input voltage and full output power.