ACU-RITE 200S - Manual (Page 60)

46 I
I - 4 T
u
rn
ing Specific Oper
ations
I - 4 Turning Specific Operations
This section discusses operations specific to turning applications only.
Tool Display Icon
The
Ø icon is used to indicate that the displayed value is a diameter
value. No icon visible indicates that the display is a radius value.
Tool Table
The 200S can store the dimensional offsets for up to 16 tools (see
sample screen). When you change a workpiece and establish a new
datum, all tools are automatically referenced from the new datum.
Setting Tool Offsets Example 1: Using TOOL/SET
Before you can use a tool, you must enter its offset (the cutting edge
position). Tool offsets can be set using the TOOL/SET or LOCK
AXIS feature.
The TOOL/SET operation can be used to set a tool’s offset using a tool
when the diameter of the workpiece is known.
8 Touch the known diameter in the X axis (1).
8 Press the TOOL soft key.
8 Scroll to the desired tool.