ACU-RITE 200S - Manual (Page 30)

16 I
I - 2 Gener
a
l Oper
ations f
o
r 20
0S
Job Clock
The job clock shows the hours (h), minutes (m), seconds (s). It
operates like a stop watch showing elapsed time. The clock starts
timing from 0:00:00.
„ The elapsed time field shows the total accumulated time from
each interval.
8 Press the START/STOP soft key, the status field will read
RUNNING. Press it again to stop time from elapsing.
8 Press RESET to reset the elapsed time. Resetting will stop the clock
if it is running.
Pressing the Decimal key while in operating mode, will also
stop and start the clock. Pressing the Zero key will reset
the clock.