ACU-RITE 200S - Manual (Page 31)

200S 17
I - 2 Gener
a
l Oper
ations f
o
r 20
0S
Remote Switch
The remote switch sets the parameters so the external switch
(pendant, or foot switch) can be enabled to perform any or all of the
following functions: Data Output; Zero, and Next Hole. Refer to
Section II for information on connecting remote switches via
Grounding Edge Finder input.
„ Data Output - to send position information out of the serial port or to
print the current position.
„ Zero - to zero one or more axes. In Distance-To-Go mode, it will zero
the Distance-To-Go display. In Actual Value mode, it will zero the
datum).
„ Next Hole key press will move to the next hole within a pattern (i.e.
Hole Pattern).
8 While in the Data Output Field, press the ON/OFF soft key to ON
to send the current position over the serial port when the switch
is closed.
8 While in the Zero Field, press the appropriate axis keys to enable
or disable zeroing of the axis display positions when the switch is
closed.
8 While in the Next Hole Field, press the ON/OFF soft key to ON to
move to the next hole within a pattern.