Acura Embedded AcuPanel 12 - Manual (Page 15)

AcuPanel 12 User Manual
Chapter 2
System Setup
System Setup
2.1. Exploring AcuPanel 12
Before starting to set up the panel PC, take familiar with the locations and purposes of controls, drives, connectors and ports, which are
illustrated in the figures below. When placed upright on the desktop, the front panel of the panel PC appears as shown in Figure 2.1.
The bottom side of the panel PC is equipped the I/O as described below.
1. LAN Port 2. USB2.0 3. USB2.0 4. RS-232/422/485 5. RS-232 6. DC IN
• LAN Port
An internal 10Base-T/100Base-TX Ethernet LAN module connects your Panel PC to other computers/networks through a local area
network (LAN).
• USB Ports (x2)
The Universal Serial Bus (USB) port allows you to connect USB 2.0-compliant devices (for example, printers, scanners and so on) to your
Panel PC.
• COM1 Port
Your Panel PC is fitted with a COM port to enable connection of a serial device such as a modem or mouse
.
• COM2 Port
Lets you connect a 9-pin external serial device such as a modem, mouse, or other serial devices.
• DC IN
Lets you connect the AC power adapter in supplying continuous power to AcuPanel12.
14