beautypg.com

Adjusting the footboard assembly, Angle – Activeforever Invacare Pronto M41 Power Wheelchair with Semi Recline Seat User Manual

Page 41

background image

SECTION 9—FOOTBOARD ASSEMBLY

Part No. 1143206

41

Pronto® M41 with SureStep®

FIGURE 9.1 Removing/Installing the Footboard Assembly

Adjusting the Footboard Assembly

Angle

NOTE: For this procedure, refer to FIGURE 9.2.

1. Loosen the jam nut and set screw located underneath on the backside of the footplate.

2. Adjust the set screw in or out to obtain the desired footboard assembly angle.

3. Thread the jam nut and washer inward until it is flush with the footboard bracket.

4. Securely tighten the jam nut and washer to secure the mounting screw in place.

FIGURE 9.2 Adjusting the Footboard Assembly - Angle

Quick Release Pin

Detent

Ball

Footboard

Assembly

Mounting

Hole

Shroud

DETAIL “A” - TOP VIEW

OF FOOTBOARD

Quick

Release Pin

Outer Edge of Tube

Detent Balls

Set Screw, Washer

and Jam Nut

Footboard Assembly