Acroprint ATR440 Payroll Recorder User Manual

Page 14

Press the F2 button.
Either 12 or 24 will be flashing on the left hand

side of the display. Press the + or - button to

change the time display. Press the E button to

accept the time display format.
The hour flashes next. Press the + or - button to change the hour

as needed. When correct, press the E button to accept the hour.
The minute flashes next. Press the + or - button to change the

minute. Press the E button to accept the minute.
The digital display will turn off. The top cover may be closed at

this point, or additional settings can be programmed. Press a

function key to program another setting in the P1 programming

group. Press the PRO button and a function key to program a

setting in the P2 or P3 programming groups.

3.5 Selecting the time card type, minute format, and day of week

language

The ATR 440 works with several different types of time cards. Time

cards normally match your organization's pay period. Time cards may

be for weekly, biweekly, semimonthly, or monthly pay periods. It is

very important to set the clock and spacing for the type of time card

you will be using since it affects the printing position on the card.

The chart on the following page is a sampling of popular time cards

that we have tested with the ATR 440 and their correct settings. The

ATR 440 can be programmed for different spacing standards. The

pitch is the amount of space between lines of type. It is measured from

the bottom of one line to the bottom of the next line.

Settings

atr440 A5 paper size.p65

8/21/02, 8:16 AM