Acroprint ATR440 Payroll Recorder - Manual (Page 13)

13
The month flashes next. Press the + or - button
to change the month as needed. When correct,
press the E button to accept the month.
The date flashes next. Press the + or - button to
change the date as needed. Press the E button to
accept the date and advance to the next setting.
The day of the week flashes next. Press the + or
- button to change the day of the week as
necessary. When correct, press the E button to
accept the day. Make sure you set the day of the
week correctly or the clock may not print
correctly.
The digital display will turn off. You have the option to close the
clock's top cover or to perform more settings at this point. To
change more settings, choose the correct program mode (P1 -
P3) and function key. You will remain in the P1 program mode
until you press the PRO button to advance to another
programming mode.
3.4 Setting the time of day, digital display, and the print
format
You may set the digital display to show the time in 12-hour
format or in 24-hour format. Setting the display also selects the
format the ATR 440 will print. In the 12-hour format, the display
will show AM or PM on the top of the display. The print regis-
tration will indicate PM hours with the minutes underscored.
Example: At two fifteen in the afternoon, the recorder would
print 02:15. In the 24-hour format the registration would be
14:15.
Open the top cover. The digital display reads P1.
Settings
atr440 A5 paper size.p65 8/21/02, 8:16 AM 13