Acroprint ATR440 Payroll Recorder User Manual

Page 10

3.2 Basic programming instructions
The programming mode is entered by unlocking and removing the top

cover from the ATR 440 with the power on. The IN/OUT buttons on

the clock serve as function keys in the programming mode. The

functions of each button are listed below and on the inside cover of the

recorder.

PRO: Press the PRO(gram) button to select the program group. If

you're in P1 mode, press the PRO button again to enter the P2 program

group. Pressing PRO again will take you to the P3 programming

choices.

F1 F2 F3 F4

PRO

OUT

MORNING AFTERNOON OVERTIME

YR/MO/DT TD/HR/MN CARD

DST

PAY END

DAY CH

SIGNAL

IN/OUT

ENTER

N/A

ACROSS

SYNC

SEC

DOWN

overtime has a separate column. Manual shifting is accomplished

by the employee selecting and pressing the IN/OUT buttons on the top

of the recorder. This causes the print to move across the card to the

selected position. Employees on different schedules can select the

appropriate "punch" location. The ATR 440 can also be programmed

to automatically move across the card. This is best utilized when a

"fixed" schedule is being used. (See position codes on the page 25).

Up/down and across the card adjustments The ATR 440 is a very

versatile time recorder. Because the spacing on different style time

cards vary, the ATR 440 allows for adjustments to assure each

registration is "near center" of the appropriate print position.

Settings

atr440 A5 paper size.p65

8/21/02, 8:16 AM