Accusys Acuta User Manual

Page 52

Accusys Acuta User’s Manual

Ö Condition 4

B a t t e r y F a i l e d

Note: Battery is low, missing, or failed.

Solution: Please contact with your distributor or vendor to change a new battery

Ö Condition 5

F a n F a i l e d

Note: Fan is low, missing, or failed.

Solution: Please contact with your distributor or vendor to change a new Fan.

16. Why can’t I use ACUTA 4/4S with Windows 98 on a USB2.0 host interface ?

Ö We recommend user NOT to use Windows 98 because Windows 98 is too old and

not compatible with many cards. Please refer to Chapter 4, the OS compatible list

table.

17. Under Fire-wire connection, ACUTA 4/4S is not detected by MAC G5 if ACUTA 4/4S

is powered on before MAC G5 is powered on ?
Ö

The problem is due to the Fire-wire chip manufacturer F/W driver issue. To solve this

issue, you can choose either :

1. Always power on MAC G5 before power on ACUTA 4/4S

2. Unplug the Fire-wire connector from MAC G5 then re-plug it again

18. Under Windows 2K/XP/2003 OS with 2 partitions (NTFS / FAT32)

, the

FAT32

partition may crash after running for days.

Ö The problem is due to the Fire-wire/USB chip manufacturer F/W driver issue. To

solve this problem, you can only use one file system for all the partitions.

格式化: 項目符號及編號

格式化: 非醒目提示

刪除: <#>Remove all four

disks carriers then reinstall

the carriers. If an array still

does not initialize, check

the disk indicators (refer to

the table on page 22) and

replace any failed disks.

<#>You also could see

below message from the

LCD:

<#>“RAID Fail”

<#>“Code:0” or “Code :1

<---->

<#>The descriptions of the

codes are:

<#>Code 0: not enough

number of function disks

for a RAID to operate

Code 1: represents disk

sequence is wrong , and

the current sequence

displayed within <>

Example:

<2134>: disk 2 and disk 1

sequence is reversed.

<13x4>: the original disk 3

is put into tray 2 and the

original disk 2 is not

plugged or failed.

<423s>: the spare disk is

put in the tray 4 and original

disk 4 is put in the tray

1Disk order error,

刪除: ,the

... [2]