Accusys Acuta - Manual (Page 45)

Chapter 5 – Partitioning the array
45
4. Enter the command to format the disk
(array): fdisk /directory/device name (e.g.
fdisk /dev/hde).
5. When the disk is formatted, you should
partition the disk. Call up the help screen as
shown to identify the correct command to
add a partition.
6. Enter the command to add a partition (in
the example given, the command is “ n.”)
7. Enter the command to create a primary
partition then enter the number of primary
partitions you wish to create.
8. Enter the command to create a Linux
second extended file system on the array.
In the example, the command is mke2fs
/directory/device (
mke2fs /dev/hde).
9. Assign the array a location: Enter mount
/directory/device /location ( mount
/dev/hde /tmp).