Accusys Acuta - Manual (Page 40)

Accusys Acuta User’s Manual
40
1. The USB port cannot be used at the same time as either of the IEEE 1394
port.
2. 2 of IEEE 1394 port are for daisy chain to connect another IEEE1394
device,not for connecting ACUTA 4/4S to 2 host
at mean time for access.
To connect to the host:
1. Power on ACUTA 4/4S and follow the
instructions earlier in this chapter to
establish a RAID array.
2. Either:
Ö Connect one end of the supplied
USB cable to the USB port and the
other end to a spare USB port on
your host computer, or,
Ö Connect one end of one of the
supplied IEEE 1394 cables to one of
the IEEE 1394 ports.
Advanced users wishing to remotely monitor the status of their array should
connect ACUTA 4/4S via an RS-232 cable to a terminal or computer hosting a
terminal emulation program.
3. The host computer should detect the presence of the ACUTA 4/4S subsystem. Turn to the
next chapter for instructions on formatting your array.
Serial ATA host interface version
Serial ATA allows transmission up to 1.5 Gbps. Serial ATA is compatible with the following host
operating systems:
Operating System SATA
Windows NT4.0 ●
Windows 2000 ●
Windows XP ●
Windows 2003 ●
Linux Red Hat 7.3
Linux Red Hat 9.0 ●
MAC OS 9
MAC OS X
Fedora ( core 1) ●
Fedora ( core 2) ●
Fedora ( core 3) ●
格式化: 非醒目提示
格式化: 非醒目提示
格式化: 非醒目提示
格式化: 非醒目提示
註解 [V16]: replaced the
photo
刪除: release
刪除: release
註解 [V17]: per MPR050305,
remove Win 98/ME supported,
and add Fedora 2 & 3 OS
supported
刪除: release