Gembird SIS-PMS-LAN - Manual (Page 54)

54
SIS-PMS-LAN PROGRAMMABLE SURGE
PROTECTOR WITH LAN INTERFACE
All brands and logos are registered trademarks of their respective owners
• Check the Disable alarm log window checkbox to disable the popup
Alarm log window (applies to all devices)
• Check the When alarm goes on checkbox, then click the Browse(…)
button to select the desired program to be launched whenever a
voltage alarm is triggered
• Check the When alarm goes off checkbox, then click the Browse(…)
button to select the desired program to be launched after the alarm
status (see above) is resolved
7.2. Setting up network devices
You don’t need to let every user in your local network have direct
access to SIS-PMS-LAN via IP address. Instead you can declare SIS-
PMS-LAN as a shared device on your server and let the other users
access it via the server.
To make SIS-PMS-LAN shared on your server press the button
Device sharing... in the Settings window (see Figure #16 above). The
window Device sharing will appear (see Figure #30 below)