Gembird SIS-PMS-LAN - Manual (Page 34)

34
SIS-PMS-LAN PROGRAMMABLE SURGE
PROTECTOR WITH LAN INTERFACE
All brands and logos are registered trademarks of their respective owners
Figure #14
• SIS-PMS-LAN is connected to local network (ping test is ok) but not
responding. Reset SIS-PMS-LAN by pressing the Reset button (A)
on the side control panel (see Figure #2 above) or switch it off and
then on again (see Figure #1 above)
NOTE: The Reset button
A (see Figure #2 above) can sometimes
help if SIS-PMS-LAN can’t be accessed or works abnormally. The device
will then be restarted. All the IP settings and device settings will remain
the same as before, but the server time will be reset and all schedules
will become outdated.