Gembird SIS-PMS-LAN User Manual
Page 33
33
SIS-PMS-LAN PROGRAMMABLE SURGE
PROTECTOR WITH LAN INTERFACE
All brands and logos are registered trademarks of their respective owners
If the status of SIS-PMS-LAN shows the device not to be Connected
- it could be due to the following reasons:
•
Incorrect IP/Port/Password specified in the Add LAN device window
•
PC is not connected to the local network
•
You are trying to access SIS-PMS-LAN from the PC which is not
allowed to do so. Change PC IP address or change IP filter list in
SIS-PMS-LAN hardware settings (see section 4.3 above)
•
SIS-PMS-LAN is not connected to local network. To check if SIS-
PMS-LAN is on your local network you can do so-called ping test:
•
Go to Start->Run
•
Type cmd
•
Type ping
the window which would appear
Suppose SIS-PMS–LAN with IP address 192.168.2.189 is
connected to the local network. Then the cmd window will look as shown
on the Figure #14 below:
- BHP-003S (12 pages)
- BTCC-001 (17 pages)
- BTCC-002 (17 pages)
- BTD-MINI (10 pages)
- SPK-103 (9 pages)
- KB-P3-BT (14 pages)
- KBS-V1-UA (11 pages)
- KB-109F (11 pages)
- DCAM-001 (11 pages)
- CMS-421 (8 pages)
- KB-P6-BT (14 pages)
- DCAM-002 (22 pages)
- DCAM-005 (12 pages)
- EE2-U3S-1 (11 pages)
- FDI2-ALLIN1-AB (12 pages)
- CHM-03 (15 pages)
- EMIC-S (13 pages)
- FD2-ALLIN1 (13 pages)
- EPA-AC2 (9 pages)
- HD32-U2S-2 (12 pages)
- HD32-U2S-1 (12 pages)
- HD32-U3S-1 (11 pages)
- KB-6106U-B-DE (12 pages)
- KB-BTF2 (11 pages)
- KBS-P5 (11 pages)
- KB-BTF1 (11 pages)
- KBS-UM-101 (12 pages)
- KB-9805LU-R (14 pages)
- MP3A-UC-AC3 (10 pages)
- KBS-61502G-DE (12 pages)
- MUS-PTU-001 (12 pages)
- MUSL-CB (12 pages)
- MUSWB2 (12 pages)
- MUSW-PT-001 (12 pages)
- MUSWN2 (11 pages)
- NIC-HP3 (12 pages)
- NBS-5 (10 pages)
- NPA-DC2 (11 pages)
- NPA-AC1D (13 pages)
- NSW-R4 (49 pages)
- SIS-TUV (10 pages)
- SIS-PWM (20 pages)
- SPK320i (11 pages)
- SPK301 (10 pages)