Gembird SIS-PMS-LAN - Manual (Page 42)

42
SIS-PMS-LAN PROGRAMMABLE SURGE
PROTECTOR WITH LAN INTERFACE
All brands and logos are registered trademarks of their respective owners
• The new event time should be in the future
• There can not be a duplicate entry
• The total quantity of events can not exceed 16 per socket
• The total quantity of events also depends on the total execution
period of the schedule
• The interval between the present and the last entry can not exceed
180 days
• Without loop the total execution period of the schedule can not
exceed 215 days
• Loop period can not exceed 180 days
NOTE: The hardware schedule keeps running even when the device
is powered off. However it is recommended not to power off the device
for extended periods, because the built-in battery has a limited lifespan. If
the battery dies the schedule will be completely cleared. The total lifetime
of the battery is no less than 2 years if the device is powered off, and no
less than 5 years if the device is powered on.
6.2. Setting up software schedule
Using the Software schedule button available from the Settings
window (see section 5.2 above) you can create the software timer
schedule (see Figure #21 below).