Gembird SIS-PMS-LAN - Manual (Page 53)

53
SIS-PMS-LAN PROGRAMMABLE SURGE
PROTECTOR WITH LAN INTERFACE
All brands and logos are registered trademarks of their respective owners
7.1. Processing the alarms
Whenever the actual measured voltage on the manageable socket
deviates from the status set by your switching tasks, it is called a Voltage
alarm.
The Voltage alarm can for example be caused by a blackout and will
be resolved after power returns. The Voltage alarm can also be triggered if
for any reason a switching task could not be carried out (switching
malfunction).
The default action by an alarm is to record this event into a log file
and show a popup Alarm log window (see Figure #29 below).
Figure #29
You might wish to process this situation in a different way, e.g. send
an email message somewhere etc.