Gembird SIS-PMS-LAN - Manual (Page 11)

11
SIS-PMS-LAN PROGRAMMABLE SURGE
PROTECTOR WITH LAN INTERFACE
All brands and logos are registered trademarks of their respective owners
3. Installation
• It is strongly recommended to avoid damp or wet places for
installation.
• SIS-PMS-LAN should be connected to the European AC wall socket
of the standard DIN 49 440.
3.1. Getting started
• Connect SIS-PMS-LAN to the wall socket first and then to the LAN
socket (or your computer LAN card) with the provided patch cord or
vice-versa.
• SIS-PMS-LAN can now be switched on and off by means of the
Main rocker switch (Z).
• Two (the first and the last) sockets of SIS-PMS-LAN are marked with
the symbol . These two sockets are switched on and off by
means of the Main rocker switch (Z) and cannot be managed by the
computer – so they are called non-manageable sockets in this
manual.
• If SIS-PMS-LAN is switched on then the red indicator POWER is lit.
In this case both non-manageable sockets are now live and
connected to the power supply.