Gembird SIS-PMS-LAN - Manual (Page 14)

14
SIS-PMS-LAN PROGRAMMABLE SURGE
PROTECTOR WITH LAN INTERFACE
All brands and logos are registered trademarks of their respective owners
• IP: 192.168.0.254
• Subnet mask: 255.255.255.0
• Gateway: 192.168.0.1
• DNS:0.0.0.0
• DHCP: enabled
• IP filtering: disabled
• Power Manager client port: 5000
.. and then search for an IP address from your eventual DHCP
server If no DHCP server is found within 30 seconds, SIS-PMS-LAN will
then automatically revert to the default settings (see above, with IP:
192.168.0.254) and additionally disable DHCP option.
3.3. Power Manager installation
It is now time to identify which IP address has been obtained by SIS-
PMS-LAN. We need to carry out the following:
• Insert the Power Manager CD into a PC CD-ROM drive. This PC
can be connected either to the same LAN where the device is (if you
chose option A section 3.2) or directly to the device with the
crossover RJ-45 cable (if you chose option B section 3.2)
• If for any reason the automatic setup does not work, then open CD-
ROM drive in the My Computer window and launch SETUP.EXE
from the CD
• Follow instructions of the installation software