3Com NBX 3101SP - Manual (Page 36)

36 C HAPTER 4: NBX M ESSAGING
Press * to cancel your message.
5 When you are ready to forward the message, press 1.
6 Dial one of these destination numbers plus #:
■
The internal extension or mailbox number of the recipient
■
A speed dial number. See “Speed Dials” in Chapter 6 .
■
A voice mail group list number. (See “Using Voice Mail Group Lists”
later in this chapter.)
■
A site code plus extension (to send to a user on another NBX system in
your organization). Example: neee or neeee (where n = one or more
site code digits and e = the extension digits on the other system).
For valid site codes in your organization, see your administrator.
7 To forward the message to several recipients, dial each destination
number followed by #.
8 After the last destination number and its #, press # again to send your
message.
9 Follow the prompts to delete or save the message you just forwarded.
Creating and
Sending a Message To create and send a message directly without actually making a call,
follow these steps:
1 Log in to your mailbox at your telephone or remotely.
2 Dial 2 to select Create and Send a Message.
3 At the tone, record a message that is at least 2 seconds long, and press #
to end the recording.
4 Optionally, press one of these buttons, OR proceed to step 5.
Press 2 to re-record the message.
Press 3 to review the message.
Press 9 to mark the message Private or Urgent. See “Marking a
Message as Private or Urgent” later in this chapter.
Press * to cancel your message.
5 When you are ready to send the message, press 1.
6 Dial one of these destination numbers plus #:
■
The internal extension or mailbox number of the recipient