Xerox SquareFold Trimmer - Manual (Page 6)

Overview
User Guide 2
SquareFold Trimmer Module
1.
2.
3.
4.
5.
The main components consist of the following:
Top Left Cover: Open this cover to remove paper jams. The
square fold mechanism is found in this area.
Top Right Cover: Open this cover to remove paper jams. The
trimming mechanism is found in this area.
The top covers cannot be opened during normal operation or when the
machine is idle. The covers can be opened only when an indicator is lit
(refer to page 4) and a jam/fault occurs within the SquareFold Trimmer
Module.
Booklet Output Tray: This tray receives square-fold booklet output from the finisher.
Trimmer Waste Container: Collects scrap/waste from the trimmer. Pull open to remove and dispose of trimmer
waste scraps.
Control Panel: The Control Panel consists of a mimic display, buttons, and various indicator lights. The control
panel is discussed in more detail on page 4.
Identifying the components
Main components
Tip
1.
2.
3.
4.
5.