Xerox SquareFold Trimmer - Manual (Page 22)

User Guide 18
Problem solving SquareFold Trimmer Module
Fault code Possible cause Recommended solution
Jam or communication error
with the SquareFold
Trimmer Module Power off/on the copier/printer. 1.
2. If fault persists, call for service.
Jam/fault with the
SquareFold Trimmer Module Open the Top Left and Right Covers of the SquareFold
Trimmer Module.
If full, empty the container and reinsert it into the •
SquareFold Trimmer Module.
If the container is partially pulled out, push it
•
completely in.
1.
2. Carefully remove all sheets and paper scraps from jam
clearance areas.
Close the SquareFold Trimmer Module Top Left and Right
Covers. 3.
Check the Trimmer Waste Container: 4.
If machine’s UI continues to reflect a fault/jam, open the
finisher and remove any jams. 5.
Follow the instructions shown on the machine’s UI to
resume printing/copying. 6.
Close the finisher cover(s). •