Xerox SquareFold Trimmer - Manual (Page 13)

User Guide 9
Overview SquareFold Trimmer Module
Trimmer feature
Accessing the Trimmer options
From the machine's UI select Copy and the Output Format tab.
The Trimmer feature can be selected for both your copy and network print jobs. Depending on the copy/print job, the
Trimmer feature can be selected from either the machine's UI or from the print driver on your workstation.
If your machine is connected to a print server, the Trimmer feature can also be selected at the print server for the
selected job.
The Trimmer feature is available only when your machine is connected to both a finisher with a booklet maker and the
SquareFold Trimmer Module.
Note
To access the Trimmer feature, perform one of the following (as applicable for your copy or network print job):
1.
For copy jobs, perform the following:
Select either Booklet Creation or Folding.
- If using the Booklet Creation feature, continue to Step 3.
- If using only the
Folding feature, continue to Step 4.
2.
From the Booklet Creation screen, select On and Fold & Staple.
From the • Booklet Creation - Fold & Staple screen, select either Fold Only or Fold & Staple.
To access the Trimmer feature, select the • Booklet Trimming/Pressing button.
3.
For information on each Trimmer option, continue to the section entitled "Trimmer options."
Note
From the Folding screen, select Single Fold.
Select • Fold as a Set.
Select the • Booklet Trimming/Pressing button to access the Trimmer feature.
4.