Xerox SquareFold Trimmer User Manual
Page 24

User Guide
20
Problem solving
SquareFold Trimmer Module
Fault code
Possible cause
Recommended solution
If machine’s UI continues to reflect a fault/jam, open the
finisher and remove any jams.
1.
Follow the instructions shown on the machine’s UI to
resume printing/copying.
2.
Close the finisher cover(s).
•
If necessary, power off/on the copier/printer.
3.
Finisher jam/fault
If fault persists, call for service.
4.
This manual is related to the following products:
- 4112-4127 Enterprise Printing System-4614 4112-4127 Enterprise Printing System-6658 4112-4127 Enterprise Printing System-3361 4112-4127 Enterprise Printing System-185 4112-4127 Enterprise Printing System-204 4112-4127 Enterprise Printing System-3380 4112-4127 Enterprise Printing System-6677 4112-4127 Enterprise Printing System-4633