Zoom 0335-A 27337 - Manual (Page 7)

Chapter 1: Installation Instructions 7
5555
When the installation is complete, click Finish, then click
Exit.
6666
Close any applications that may be open, then remove the CD
from the CD-ROM drive.
7777
Shut down the computer.
Congratulations! You have installed the software. Now, continue
with the next section, Installing the Hardware.
Step 2: Installing the Hardware
1111
Shut down your computer (if it is not shut down already).
2222
Plug one end of the supplied phone cord into the modem’s
ADSL port and the other into the ADSL wall jack.
3333
Connect the modem to the computer’s Ethernet port. Plug one
end of the Ethernet cable into the modem’s ETHERNET
port and plug the other end into your computer’s Ethernet
port.
The connection is made to the back panel of the modem.
4444
Plug the included power cube into a power strip or wall outlet
and then into the modem’s power (PWR) jack.
Important!
Only use the power cube shipped with the modem. Other
power cubes may damage your hardware.