Zoom 0335-A 27337 User Manual
Page 13
Chapter 2: Using Static IP Addressing
13
To configure your ADSL Bridge modem to use a static
IP address
1111
Before you can access the modem’s interface, you must first
change your computer’s TCP/IP settings to match the values
show in the table below.
For this value…
Enter…
IP address
Any value between 10.0.0.4 and
10.0.0.20. For example, type 10.0.0.10.
Subnet mask
255.255.255.0
Default gateway
10.0.0.2
Tip!
If do not know how to access your computer’s TCP/IP
settings, see Chapter 3: Specifying TCP/IP Settings on
2222
Log into the Zoom Configuration Manager.
a
aa
a
Open your Web browser and, in its address bar, type
http://10.0.0.2, then press the Enter key on your
keyboard. (You do not need to have an Internet
connection established to be able to view the interface.)
Tip!
If you are using a Windows computer, a Zoom icon
should have been placed on your desktop when you
installed the software provided with the modem. Instead
of typing one of the addresses above in your Web browser,
you can double-click the Zoom icon.
b
bb
b
When prompted, type the following user name and
password in the appropriate boxes, then click OK. You
must enter them using lowercase letters.
User Name: admin
Password: zoomadsl