Zebra Technologies TTP 7030 - Manual (Page 71)

10/05/2009 TTP 7030™ Technical Manual P1003636-002
6
Default Parameter Settings
Default Value
The default values indicated are "factory default settings" you get by sending 
&
. These are not necessarily the settings that your printer was originally delivered
with because many printers have customized settings when delivered.
Examples
Command examples are formatted in Courier and typed in the same way as used in the
Zebra Toolbox:
&P<1><19>
Where
means the escape character 27 decimal (hex 1B). Numbers between less-than
and greater-than characters, for example <015>, means 15 decimal (hex F).
0 Default
0 Min
47
255 Max
Eject calibration constant (mm) DRV
Parameter number
Default value
Range
Description as printed on self test printout
DRV indicates that the
Windows driver overrides setting
SW 02001