Xerox 721P87481 User Manual
Page 57
PRINTING USING XEROX UTILITIES AND LPR UTILITIES (DOS AND UNIX)
GUIDE TO SUBMITTING JOBS FROM THE CLIENT
3-19
-C“(hcm=
Specifies the action to take when there is a mismatch between
the highlight color you specify and the dry ink color loaded in the
printer. The default for the hcm option is “ignore.” The optional
actions are as follows:
“abort”
Requests that your job abort if the highlight color you
specify is not loaded at the printer.
“ignore”
Requests that the available dry ink color be used to print
your job, regardless of whether you specify that color.
“operator”
Suspends the job in an “ineligible” state while the operator
loads the color dry ink you specify.
If you specify “operator,” the job prints automatically after
the operator loads the correct dry ink; however, the job will
not print until this task is completed. The job shows in the
list of documents at the Printer Controller, with “Ineligible”
listed as the job status.
-C(hcr=
Specifies mapping a three-dimensional color application (such
as RGB) to the two-dimensional color application provided with
highlight color printing.
Since some information is lost in mapping, the color rendering
options allow you to determine what qualities are the most
important to preserve:
pictorial
Maintains the pictorial quality:
Colors with a hue matching the map color are not changed.
Colors with a hue close to the map color are rendered with
color, but with a saturation level that decreases as the hue
shifts away from the map color.
Colors with a hue complementary to the map color are
produced in shades of gray.
presentation
Distinguishes between different colors. This attribute is a
good choice for charts and diagrams because they typically
use distinctly different colors. Colors that have a hue that
matches the map color will not be changed. There will be
discontinuities that may produce undesirable results in
pictorial material.
colorToHighlight
Discards the hue information and preserves the saturation
and value of the color application. Fully-saturated input
colors will turn into a solid highlight color despite which map
color is in effect. This is useful for documents that only use
spot color for emphasis.