Xerox 721P87481 User Manual

Page 128

SUBMITTING PRINT JOBS USING WINDOWS NT 4.0 DRIVERS

5-20

GUIDE TO SUBMITTING JOBS FROM THE CLIENT

Specifying paper stocks

You can use the Paper Stocks dialog to specify the size, type, and
color for up to ten paper stocks. The default paper stock is Paper
Stock 1. Other stocks may be specified for use through the Special
Pages dialog (refer to the section “Specifying Special Pages”).

To select the paper stock you want to configure, complete the
following steps:

1. On the DocuPrint NPS Setup window, click the Paper Stocks...

icon.

2. Click the stock number you want to change.

Note:

The check mark next to the stock number indicates the

stock currently in use by the job.

3. Define the Size, Type, and Color of the paper stock, and

whether to use drilled paper (refer to the sections that follow).

4. To save the parameters, click [OK]. To cancel your changes,

click [Cancel].

Note:

Main stock (Stock #1) programming is performed on the

DocuPrint NPS Setup window.