Xerox 721P87481 - Manual (Page 45)

PRINTING USING XEROX UTILITIES AND LPR UTILITIES (DOS AND UNIX)
GUIDE TO SUBMITTING JOBS FROM THE CLIENT 3-7
-pagesToPrint <#> <#>
Specifies the starting and ending page numbers to print. You
cannot enter 0, and the second number must be greater than or
equal to the first number.
-paperColor
Specifies the paper color. Acceptable values are “white,”
“yellow,” “blue,” “green,” “pink,” “clear,” and “custom.” If you
specify “custom,” include a text string indicating the color in the
syntax. For example, “-paperColor custom purple.”
Note: Colors with an embedded dot “.” are invalid.
-pdl
Specifies the page description language (PDL) type of your
document. Valid PDL values are “ps” for PostScript, “ps1” for
PostScript level 1, “ps2” for PostScript level 2, “ascii,” “hppcl,”
“pcl5c,” and “pcl5e.”
-pePlex <#> <#>
Specifies the page range to be printed using the given plex type.
To use this option, enter the beginning page, ending page, and
the desired plex value. Valid plex values are “simplex,” “duplex,”
and “tumble.”
-peXShift <#> <#> <#>
Specifies the page range to be printed with a horizontal image
shift, the amount of shift (in millimeters), and whether the shift is
to be applied to front sides, back sides, or both. To use this
option, enter the beginning page, ending page, the amount of
shift in millimeters, and “even,” “odd,” or “all” for the sides.
-peYShift <#> <#> <#>
Specifies the page range to be printed with a vertical image shift,
the amount of shift (in millimeters), and whether the shift is to be
applied to front sides, back sides, or both. To use this option,
enter the beginning page, ending page, the amount of shift in
millimeters, and “even,” “odd,” or “all” for the sides.
-plex
Specifies the print mode (simplex, duplex, or tumble) for the print
job. Tumble duplex printing rotates the image 180 degrees on
alternate pages. Both sides of page are printed but the position
of the image is reversed (from top to bottom) on every other
page.
Note: The use of tumble duplex is restricted by certain
characteristics of the PostScript mask. If you have difficulty using this
option, contact your Xerox representative for assistance.
-plexDynamic
Specifies that plex changes indicated in the job data stream are
honored.